Thursday, December 23, 2010

Port Dickson-The shutdown crew and sneak peek on the new GE 9FA

Here are the dayshift shutdown crew of our recent job in PD
consisting of crew members from TNB Remaco and Sikojaya
and the job was a combustion inspection with some extra unplanned works.


Doing a balancing act with the Dry Low Nox fuel nozzle.

Hairi taking a second look on the nozzle.


Removing exhaust frame blowers on the turbine compartment roof before the roofing is removed.
Zamduka removing the flange boltings.


The reconditioned 18 pieeces of DLN nozzles ready for installation,
these parts need to be prepared earlier before the main job starts.
Reconditioned Combustion liners.
Fuel Nozzles,Flow sleeves,liners,x firetubes and transition pieces  are combustion system parts
that are  inspected. and replaced according to schedule.
These transition pieces are back breaking for all of us,
lifting gear need to be used during removal and installation.
Pipings to the DLN nozzles.
manifolds run around the casings.


at

6 comments:

  1. gbeejippDecember 23, 2010 at 11:15 AM

    wohooo. heavy machinery. I have no idea what they are but you seem to have an interesting job.

    ReplyDelete
  2. Thomas LeeDecember 23, 2010 at 4:56 PM

    JIPP,
    On a smaller scale this machine is similar to the aeroplane engine and is used to turn a generator
    to produce electricity.
    A big Gas Turbine like this can produce about 230MW of electricity and 4 will be enough for the whole of Sabah.

    ReplyDelete
  3. AdamDecember 23, 2010 at 11:00 PM

    Great experience! Can work with so many different machine...^^

    ReplyDelete
  4. papabearDecember 26, 2010 at 5:02 PM

    impressive looking machineries... :)

    ReplyDelete
  5. AnonymousFebruary 12, 2011 at 1:24 PM

    power la tokey nie

    ReplyDelete
  6. kokofxAugust 20, 2011 at 11:25 PM

    14 UNITS FLOW SLEEVE FOR DELTA IV UNITS PART NUMBER 237B 2703 P001

    Urgent quotes needed. Send to procurement_valenz@yahoo.com

    ReplyDelete